COMAT 2026
Jun 15, 2026
The 9th annual COMAT 2026 international conference—Modern Trends in Structural Materials—will take place September 8–10, 2026, in Pilsen. ... more
Sitemap
- Home
- Activities
- References
- About us
- Projects
- Conferences
- Contacts
- Sitemap
- Articles
- 2018
- Influence of Accumulative Roll Bonding on the Texture and Tensile Properties of an AZ31 Magnesium Alloy Sheets
- Identification of ductile damage parameters for pressure vessel steel
- Effects of thickness and orientation on the small scale fracture behaviour of additively manufactured Ti-6Al-4V
- Microstructure, mechanical properties and welding of low carbon, medium manganese TWIP/TRIP steel
- Cold/Hot Deformation Induced Recrystallization of Nickel-Based Superalloys for Molten Salt Reactors
- 'Thermal Conductivity of an AZ31 Sheet After Accumulative Roll Bonding
- 'Amplitude-dependent internal friction in AZ31 alloy sheets submitted to accumulative roll bonding
- GAS NITRIDING WITH DEEP CRYOGENIC TREATMENT OF HIGH-SPEED STEEL
- USING THERMOMECHANICAL TREATMENTS TO IMPROVE THE GRAIN GROWTH OF NEW-GENERATION ODS ALLOYS
- Possibilities of biocompatible material production using conform SPD technology
- 'Effect of the Parameters of Semi-Solid Processing on the Elimination of Sharp-Edged Primary Chromium Carbides from Tool Steel
- 'Two-body abrasion resistance of high-carbon high-silicon steel: Metastable austenite vs nanostructured bainite
- Proliferation of Osteoblasts on Laser-Modified Nanostructured Titanium Surfaces
- Anisotropy of Thermal Expansion in an AZ31 Magnesium Alloy Subjected to the Accumulative Roll Bonding
- Effect of Accumulative Roll Bonding of an AZ31 Alloy on the Microstructure and Tensile Stress
- Characterization of the Microstructure, Local Macro-Texture and Residual Stress Field of Commercially Pure Titanium Grade 2 Prepared by CONFORM ECAP
- Grain Structure and Microhardness Development of Twin-Roll Cast Aluminum Strips after Constrained Groove Pressing
- Hydrogen Embrittlement of a Quenching and Partitioning Steel during Corrosion and Zinc Electroplating
- Comprehensive Evaluation of the Properties of Ultrafine to Nanocrystalline Grade 2 Titanium Wires
- Influence of strain rate on deformation behaviour of an AX52 alloy processed by equal channel angular pressing (ECAP)
- Micro-Tensile Behavior of Mg-Al-Zn Alloy Processed by Equal Channel Angular Pressing (ECAP)
- Microwave spectrum and molecular constants of indole
- 2019
- Strengthening from Cu Addition in 0.2C-(1-2)Mn Steels during Tempering
- Influence of Austenite Grain Size on Mechanical Properties after Quench and Partitioning Treatment of a 42SiCr Steel
- Molten Salt Corrosion of Ni-Mo-Cr Candidate Structural Materials for Molten Salt Reactor (MSR) Systems
- COMPARISON OF THE POWDER BED FUSED MATERIALS FROM DIFFERENT POWDER MANUFACTURERS
- Methods of testing the mechanical properties of additively manufactured components
- IZBOLŠANJE VISOKOTEMPERATURNIH LASTNOSTI NOVE GENERACIJE Fe-Al-O
- Effect of Rotary Swaging on Microstructure and Mechanical Properties of an AZ31 Magnesium Alloy
- Determination of Directional Residual Stresses by the Contour Method
- THERMOELASTIC RESPONSE OF METALS AT DIFFERENT LOADING RATES
- Formation of Intermetallics Layers in Ni-Ti System Prepared by Direct Energy Deposition
- Influence of Heat Treatment on Microstructure and Properties of NiTi46 Alloy Consolidated by Spark Plasma Sintering
- Strain Range Dependent Cyclic Hardening of 08Ch18N10T Stainless Steel—Experiments and Simulations
- The Effect of Hot Working on the Mechanical Properties of High Strength Biomedical Ti-Nb-Ta-Zr-O Alloy
- HAZ characterization of welded 42SiCr steel treated by quenching and partitioning
- 2020
- INFLUENCE OF PROCESSING CONDITIONS ON PROPERTIES OF AISI 316LN STEEL GRADE
- Thermo-physical properties investigation in relation to deposition orientation for SLM deposited H13 steel
- Continuous Production of Pure Titanium with Ultrafine to Nanocrystalline Microstructure
- Magnesium Reinforced with Inconel 718 Particles Prepared Ex Situ—Microstructure and Properties
- Structure and Properties of High-Strength Ti Grade 4 Prepared by Severe Plastic Deformation and Subsequent Heat Treatment
- Flexible manufacturing chain with integrated incremental bending and Q-P heat treatment for on-demand production of AHSS safety parts
- Influence of martensite deformation on Cu precipitation strengthening
- Using DEFORM Software for Determination of Parameters for Two Fracture Criteria on DIN 34CrNiMo6
- Influence of thickness reduction on forming limits of mild steel DC01
- Formation of Phases in Reactively Sintered TiAl3 Alloy
- Optimization of the Mechanical Performance of Titanium for Biomedical Applications by Advanced, High-Gain SPD Technology
- Strengthening and Thermally Activated Processes in An AX61/Saffil Metal Matrix Composite
- Local Mechanical Properties and Microstructure of EN AW 6082 Aluminium Alloy Processed via ECAP–Conform Technique
- Effect of Equal Channel Angular Extrusion on the Thermal Conductivity of an AX52 Magnesium Alloy
- Fracture analysis in directed energy deposition (DED) manufactured 316L stainless steel using a phase-field approach
- Numerical Simulation Development and Computational Optimization for Directed Energy Deposition Additive Manufacturing Process
- Effects of build orientation and sample geometry on the mechanical response of miniature CP-Ti Grade 2 strut samples manufactured by laser powder bed fusion
- Effects of build orientation and sample geometry on the mechanical response of miniature CP-Ti Grade 2 strut samples manufactured by laser powder bed fusion
- Effect of Si Addition on Martensitic Transformation and Microstructure of NiTiSi Shape Memory Alloys
- Influence of sandblasting and acid etching on fatigue properties of ultra-fine grained Ti grade 4 for dental implants
- Fracture Toughness Analysis of Automotive-Grade Dual-Phase Steel Using Essential Work of Fracture (EWF) Method
- Effects of Rotary Swaging Parameters and Artificial Ageing on Mechanical Properties and Microstructure of 2024 Precipitation-Hardenable Aluminium Alloy
- Build Size and Orientation Influence on Mechanical Properties of Powder Bed Fusion Deposited Titanium Parts
- Induction Annealing of Austenitic Spring Steels for Nuclear Reactors
- Microstructure and Mechanical Properties of COLD-DEFORMED PURE TITANIUM AND TITANIUM GRADE 5
- Effects of Rotary Swaging, Wire Drawing and their Combination on the Resulting Properties of Nickel-alloy Wires
- Post-Processing Treatment Impact on Mechanical Properties of SLM Deposited Ti-6Al-4 V Porous Structure for Biomedical Application
- Small scale testing of IN718 single crystals manufactured by EB-PBF
- Formation of Phases in Reactively Sintered TiAl3 Alloy
- 2021
- Strain Hardening in an AZ31 Alloy Submitted to Rotary Swaging
- Experimental and computational analysis of additively manufactured tensile specimens,
- Comparison of Industrial Quenching Oils
- Studying the Thermally Activated Processes Operating during Deformation of hcp and bcc Mg–Li Metal-Matrix Composites
- Determining Forming Limit Diagrams Using Sub-Sized Specimen Geometry and Comparing FLD Evaluation Methods
- Effects of Silicon, Chromium, and Copper on Kinetic Parameters of Precipitation during Tempering of Medium Carbon Steels
- Microstructural Observations of AM Deposited 15-5PH - Stellite Sample
- Fracture Prediction Based on Evaluation of Initial Porosity Induced By Direct Energy Deposition
- Damage tolerant design of additively manufactured metallic components
- Structural integrity and mechanical properties of the functionally graded material based on 316L/IN718 processed by DED technology
- Copper-Induced Strengthening in 0.2 C Bainite Steel
- Development of Universal Mould Geometry for the Teeming of Cylindrical Iron-Base Alloy Ingots
- Mechanical properties after thermomechanical processing of cryogenic high-strength materials for magnet application
- A comprehensive description of reactions between nickel and aluminum powders during reactive sintering
- Base Plate Preheating Effect on Microstructure of 316L Stainless Steel Single Track Deposition by Directed Energy Deposition
- Fracture toughness examination of dual-phase and interstitial free steel using essential work of fracture method
- Effect of 1.5 wt% Copper Addition and Various Contents of Silicon on Mechanical Properties of 1.7102 Medium Carbon Steel
- Low cycle fatigue properties assessment for rotor steels with the use of miniaturized specimens
- Fracture locus characteristics of Al alloy 5083 processed by equal channel angular pressing using miniaturized specimens
- Fatigue properties of UFG Ti grade 2 dental implant vs. conventionally tested smooth specimens
- Accumulative roll-bonding of aluminium sheets at room and cryogenic temperatures
- 2022
- 2023
- 2018
- Articles
- E-shop Proinno a.s.
